Showmojo Lockbox WP

Here is how to generate a code for the showmojo lockboxes at vacant homes:

  •  Open and sign in to showmojo.com
    • Username is RPMSolutions
    • Password is harley_1
  • Locate the appropriate listing on the Listings page. 
  • Click on "Digital Access"
  • Under the Primary Access Device Section:
    • Select Date that code is to be used. 
    • Click “Get a Code”

To access the Codeboxes:

1.     Enter code 157695 and press ENTER

2.     The screen will show the date, time and serial number.

3.     Wait for the screen to say:

Select CMD: 1: Set Date_

4.     Press 3

5.     Push on door to pop open

6.     For ‘newer’ Codeboxes (you can identify these as having the word ‘SELLER’ on the #5 key), you can bypass the above by typing in code 57695.

7.     Do not share this code with anyone outside the company.

To unshackle Codeboxes:

1.     Enter code 99612 and press ENTER

2.     Pull to unshackle.

3.     Wait for screen to turn off then push to close

To check the date and time setting for a codebox and change the date time setting if necessary

1.     Enter code 157695 and press ENTER

2.     Wait for the screen to show the date, time and serial number

3.     Confirm the proper date and accurate time is displayed

To set the date, follow these steps:

1.     Enter code 157695 and press ENTER

2.     Wait for the screen to say:

Select CMD: 1: Set Date_

3.     Press 1

4.     The cursor will be directly under the first number of the month.  Using the key pad, choose the proper number(s)  and repeat until the month, day and year are displayed. Example: 01/05/2018 – 

5.     Press enter

To set the time, follow these steps:

1.     Enter code 157695 and press ENTER

2.     Wait for the screen to say:

Select CMD:

1: Set Date_  and thenpress 2

3.     The cursor will be directly under the first number of the time.  Using the key pad, choose the proper number(s) and repeat until the proper time ( in 12 hour format) is displayed

4.     Press 3 to change to set AM or PM and press Enter

5.     Do not change the next set of numbers. It should say L00A

To obtain a one time code or to instruct ANY vendor to access a home with a code box, follow these steps

1.     At the top of the codebox, locate the serial number (example SN:10005690 )

2.     Access the text message function on your smartphone or other device that has text functionality

3.     With the codebox serial number in your possession, start a new text on your device to 312-971-6474

4.     Using the prefix rpms- , PLUS the codebox serial number, enter the entire sequence into your text message and press send and you will receive a code valid for one day only.  This code can be used multiple times during the day

a.      Example: rpms-10005690

b.     rpms must be lower case and the dash must be used. No spaces in the sequence

 You are not authorized to change any other codes within the codebox unless authorized in writing from your supervisor 

Assign a Lockbox to a Property in Showmojo

  • 1.      Open and sign in to showmojo.com
  • 2.      Go to the properties listing page.
  • 3.      Click the “Digital Access” on the left hand side menu of the page
  • 4.      Click "Edit" option for Primary Access Device
  • 5.      Select "Code Box" from the drop down menu
  • 6.      Select the Lockbox Serial number from the drop down menu.
  • 7.      Click "Save." You have assigned a lockbox 

Still need help? Contact Us Contact Us